Skateboard Deck Sizes Explained
Skateboard Deck Sizes Explained. The truck and deck size chart above is a general guideline based off common sizes found here at tactics. The skates have a total of 4 wheels and two bearings are required to rotate a single wheel.
Contrary to what you might think, width is the most important part of choosing a skateboard deck, not length or wheelbase. The size of your feet is often a pretty good indicator of your board size. If you don’t have a tape measure, you can use a piece of string.
9.0″ Truck Axle For 9” To 10” Skateboard Decks.
8.5″ truck axle for 8.5” to 9″ skateboard decks. First, you need to consider the width of the deck. 5ft 6in or taller :
Adults For Skating At Verts, Parks, Cruising, Ramp, And Rails:
Follow these measurements to get an appropriate skateboard. Arguably the most important measurement you need to know about your skateboard is your board size. Everyone skates different and prefers.
And Are Between 3 Inches To 5 Inches.
8.0″ truck axle for 8” to 8.5″ skateboard decks. By measuring the same deck with the three. On graphic side with contour.
The Standard Bearing Dimensions Are 8Mm (Inner Diameter), 22Mm (Outer Diameter),.
Skateboard length can be determined by measuring from the tip of the nose to the tail. The nose (front), the wheelbase (between the trucks) and. The skateboard deck length is not as much of an important factor.
If You Don’t Have A Tape Measure, You Can Use A Piece Of String.
The most common sizes of. The size of your feet is often a pretty good indicator of your board size. The skates have a total of 4 wheels and two bearings are required to rotate a single wheel.
Post a Comment for "Skateboard Deck Sizes Explained"