How To Get Bearings Out Of Skateboard Wheels
How To Get Bearings Out Of Skateboard Wheels. Unscrew the nut that holds the wheel on the axle. Soak the bearings in acetone or solvent.
If you don’t have a skateboard tool, you can use a crescent or a socket wrench. Regular maintenance of the bearing is key for your skateboards’ lasting. For sure, these circumstances can decrease the speed of your skateboard, or much worse;
This Should Be Done Gently And Slowly At A Downward Angle So That The Wheel Is Unaffected As The Bearing Is Removed.
It’s one of the easiest & quickest ways to get the bearings out of the skate wheels. When this is done, you should easily take out the second one with your fingers. Rate this post contents show 1 how to get bearings out of skate wheels 2 eliminating skateboard wheel bearings 3 cleaning up skateboard wheel bearings how to get bearings.
If You Don’t Have A Skateboard Tool, You Can Use A Crescent Or A Socket Wrench.
Get a wrench to remove the nuts and washer. It can lead to accidents. Use a kitchen knife to scrape out bearings from an ice cube.
Don’t Loose The Washers That Sit Either Side Of The Wheel,.
This is my first tutorial so if you want more of this kind o. If you don’t have it, no problem, use a ½” socket wrench because wheel nuts are usually 13mm, that’s ½”. 1) remove the old bearings from the wheel.
Obliterate The Wheel And Use The Puller To Hook The Skateboard Bearing Out.
You will need to remove. Using the socket wrench, remove first the nuts on your board wheel. Be careful not to damage the axle in.
Apply A Force Of The Right Hand On The Wheel Shaft.
Regular maintenance of the bearing is key for your skateboards’ lasting. Now pry your skateboard wheels out before you can remove the main bearing assembly. If there is any spacer in between the bearing & wheel, be sure to remove them & store them in a.
Post a Comment for "How To Get Bearings Out Of Skateboard Wheels"